Click image to view full size image
1. Specification
Compact spot repair vulcanizer in light-weight construction for spot repairs on rubber conveyor belts.
Features of a Spot Repair Vulcanizer
1. spot repair vulcanizer ready for use for the repair of conveyor belts
2. particularly easy-to-transport due to the low weight of the single parts
3. transportation by only one person is possible, as there are only two components
Repair vulcanizers are constructed to customers requirements. Depending on the model and the size of the heating platens, c-clamp vulcanizers can be used for spot, edge, and rip-repairs.
Model | DDQ-1 DDQ-2 | DJQ | DZQ |
Application | For small holes | For the side of the belt, long rips | Multifunction, combined type used for small holes or long rips |
Conveyor Belt type | Canvas, nylon, steel cord belt | Canvas, nylon, steel cord belt | Canvas, nylon, steel cord belt |
Repair Belt width | 650-2600 DDQ-1 used for wider than 1400mm DDQ-2 used for under 1400mm | 650-2600 | 650-2600 |
Max rips size (mm) | 250x250 | 100 (200) x 900 100 (200) x 1400 | 250x1380 |
Heating plate size (mm) | 350x350 | 160x1000 160x1500 | 350x1500 350x1000 |
Temperature range | 0~200°C | 0~200°C | 0~200°C |
Voltage | 380V or 220V or other special voltage | 380V or 220V or other special voltage | 380V or 220V or other special voltage |
Pressure | 0.4Mpa | 0.4Mpa | 0.4Mpa |
Spot Repair Press for Rubber Conveyor Belt width under 1600mm
